2” Universal Garage Door Torsion Spring Cones

Secure and Wind 2 inch inner diameter garage door torsion springs with Universal Spring Cones from Action Industries. Spring Cones come in two types: Stationary and Winding. Stationary cones are required on every garage door torsion spring to hold one end in place so tension can be added and released. Winding cones allow tension to be added to the spring upon installation with a winding bar.

Product Detail

Product Tags

Product Detail

Garage Door Spring Cones  2

Material: Aluminium alloy
Inside diameter :1 3/4’, 2’, 2 5/8’, 3 3/4’, 5 1/4’, 6’
Product name :Garage Door Torsion Spring Cones/
Maximum Wire Size of .295” Diameter
To be used on 1” torsion bars
Maximum torque capacity generated by spring: 569in-lbs
Sold as a pair(Included 1 Winding cone and 1 Stationary cone)
Two pieces set
Manufacturer warranty: 3 years
Package: Carton boxes

Available Options

2” Universal Stationary Spring Cone
2” Universal Black Winding Spring Cone L
2” Universal Red Winding Spring Cone R


Cones for 2 inner diameter garage door springs
One winding cone and one stationary cone on each torsion spring
Allows tension to be added and retained
Winding cones work with winding bars

Stationary cones mount to an anchor bracket
If you want to install them yourself, you can follow these steps and get the job done properly. The winding cone is located at one end of the spring. A stationary cone is at the opposite end. Start with the stationary cone. Take the nuts and bolts from the spring anchor bracket and install them in the stationary cone.
Using a vise, grip both nuts tightly. The next step is extremely critical regarding the spring removal from the cone. The spring wire end should be hooked with a pipe wrench or by using large channel locks. The wrench should be turned to the point when the spring comes off of the cone.

garage door spring 91
garage door torsion springs 105
garage door torsion springs 192

  • Previous:
  • Next:

  • Write your message here and send it to us